Panel hangers

MOSO® top of slab fix

The MOSO® panel hanger is an DiBt officially approved system. It consists of an upper part, a middle part and a cast-in part. The upper mounting is fixed to the top of slab with an officially approved dowel or a MOSO® CE anchor channel.

Contact us
MOSO® top of slab fix
MOSO® top of slab fix real render
1 of 2

Applications and features

Applications:

  • Precast facade panels with a cavity of up to 500mm.

Features:

  • A lot of adjustability to suit design and installation needs.
  • Simple and quick installation.
  • Easy-to-use software to verify calculations.
  • Single fixing point on the face.
  • Extensive product range taking loads from 6 - 70 kN.
  • CFS can provide other dimensions than specified below.

Product variants

Product variants
Load classDimensions
Profile sizeLoad range [kN]
Load capacity group
Depth [mm]Load group [T]x [mm]
Depth
y [mm]
Width
L2 [mm]
Length
Ø D1 [mm]
Diameter
j [mm]
Hole width
a1 [mm]
Gap between holes
C [mm]
Hole to edge distance
Matching profile
Compatible part
e1 [mm]
Length
Max supported height [mm]Load group [T]
FB-H1A-6.06.01245FB-HE-6.0
FB-H1A-8.58.51260FB-HE-8.5
FB-H1A-13.513.51460FB-HE-13.5
FB-H1A-16.016.01465FB-HE-16.0
FB-H1A-22.022.01465FB-HE-22.0
FB-H1A-38.038.01880FB-HE-38.0
FB-H1A-48.048.01890FB-HE-48.0
FB-H1A-70.070.022120FB-HE-70.0
For C larger than Cmin, we can adapt the shell and fixing materials.MOSO® single top of slab fix is part of three part panel hanger system, where the FB-H1A is the part attached to the front of the structure and FB-HE is the part cast-in the panel with reinforcement.

Specification

TypeDesignCavityLoad [kN]
FBH1A60 - 250*6.0/8.5/13.5/16.0/22.0/38.0/48.0/70.0
* Panel hangers for larger cavities are available upon request.

Type-Design-Cavity-Hx-Load

Specification text:

FB-H1A-60-225-6.0
MOSO® precast fixing FB-H1A-60-225-6 including officially 3x hex nut DIN EN ISO 4032 (DIN 934) - 3x washer DIN EN ISO 7089 (DIN 125) - Threaded rod A4-70 - MHK bolt up to LL 22.0 kN.


Approvals and declarations

  • ETA Z-21.8-2012

Materials

ComponentMaterialDescription
Hanger1.4462, 1.4062Duplex and lean duplex steel

Can’t find what you’re looking for?