Panel hangers

MOSO® top of slab double fix

The MOSO® panel hanger is an DiBt officially approved system. It consists of an upper part, a middle part and a cast-in part. The upper mounting is fixed to the top of slab with an officially approved dowel or a MOSO® CE anchor channel. This part of three part panel hanger system.

Contact us
MOSO® top of slab double fix 3D model
MOSO® top of slab double fix real render
1 of 2

Applications and features

Applications:

  • Precast facade panels with a cavity of up to 500mm.

Features:

  • A lot of adjustability to suit design and installation needs.
  • Simple and quick installation.
  • Easy-to-use software to verify calculations.
  • Single fixing point on the face.
  • Extensive product range taking loads from 6 - 70 kN.

Product variants

Product variants
Load classDimensions
Profile sizeLoad range [kN]
Load capacity group
Depth [mm]Load group [T]x [mm]
Depth
y [mm]
Width
L2 [mm]
Length
Ø D1 [mm]
Diameter
j [mm]
Hole width
a1 [mm]
Gap between holes
C [mm]
Hole to edge distance
Matching profile
Compatible part
e1 [mm]
Length
Max supported height [mm]Load group [T]Max lateral load [kN]
FB-H2A-6.06.0102010080FB-HE-6.0
FB-H2A-8.58.5102010085FB-HE-8.5
FB-H2A-13.513.5122011585FB-H2A-13.5
FB-H2A-16.016.0122011590FB-HE-16.0
FB-H2A-22.022.0122013090FB-HE-22.0
FB-H2A-38.038.01440150125FB-HE-38.0
FB-H2A-48.048.01840180160FB-HE-48.0
FB-H2A-70.070.01840205180FB-HE-70.0
MOSO® top of slab double fix is part of three part panel hanger system, where the FB-H2A is the part attached to the top of the structure and FB-HE is the part cast-in the panel with reinforcement.

Specification

TypeDesignCavityHxLoad
FBH2A60 - 250*225 - 6606/8.5/13/16/22/38/48/70
For Hx dimension see technical page. * Panel hangers for larger cavities are available upon request.

Type-Design-Cavity-Hx-Load

Specification text:

  • FB-H2A-60-225-6.0
    MOSO® precast fixing FB-H2A-60-225-6.0 including officially 3x hex nut DIN EN ISO 4032 (DIN 934) - 3x washer DIN EN ISO 7089 (DIN 125) - 4x washer DIN EN ISO 7093 (DIN 9021) - Threaded rod A4-70 - MHK bolt up to LL 22.0 kN.

Approvals and declarations

  • ETA Z-21.8-2012

Materials

ComponentMaterialDescription
Hanger1.4462, 1.4062Duplex and lean Duplex steel

Can’t find what you’re looking for?